Toray to Exhibit at CAMX 2017 and Showcase its Advanced Carbon Fiber, Engineered Products and Material Technologies

November 01, 2017

CAMX Conference rescheduled for December 11th-14th, 2017, Orange County Convention Center, Orlando, FL


For the 2nd year in a row, Toray Composite Materials America, Inc. will be exhibiting at the CAMX Conference in Orlando, Florida to promote their latest innovations in Carbon Fiber and Composite Material. The CAMX Conference was rescheduled due to hurricane Irma. The new dates for the conference are December 11th – 14th, 2017.


Toray Composite Materials America, Inc.  has reserved a Conference Room at the Convention Center (Room W204B, Level II – directly across from the Exhibit Hall) during CAMX to showcase our Material Technologies; Material Topics will cover:


  • T1100G/3960 Advanced Material System
  • T1100 Series Carbon Fiber for Filament Winding


Carbon Fiber Materials


Toray’s TORAYCA® brand carbon fibers are globally recognized for their outstanding performance, quality and processing consistency, making them the preferred choice of designers, engineers and fabricators worldwide.


Standard Modulus Carbon Fibers - typically exhibit a fiber modulus of 33-34 msi, or slightly higher. These are the most cost-effective fibers as measured by tensile strength or modulus per unit cost.


Intermediate Modulus Carbon Fibers (IM) - exhibit a tensile modulus of 42 msi. Originally developed for aerospace applications, IM fibers now find use in recreational and industrial applications as well.


High Modulus Carbon Fibers MJ and M-series - represent the highest modulus PAN-based carbon fibers available.


High Strength Carbon Fibers - Toray offers the highest tensile strength and highest strain-to-failure carbon fibers available in the world. Toray is a leading global supplier of high quality composites prepreg materials and offers a full product suite; Unidirectional Tape, Slit Tape, Fiberglass Fabrics, Carbon Fabrics and Resin Products. Toray’s prepreg products are used for Aerospace, General Aviation, Recreation, Sporting Goods and Industrial applications.


Carbon Fiber Composite Prepreg Materials


Aerospace - Toray’s 3900 series prepregs are used for aircraft primary structures. The prepreg can come in a variety of forms including unidirectional tape for manual or automated tape layering applications, slit-tape-tow for automated fiber placement applications, and plain-weave carbon and glass fabrics.


General Aviation - Out of Autoclave (OOA) - Toray’s 2510 resin system is specifically formulated to meet the stringent requirements of general aviation primary structural materials. Design Allowables accepted by the FAA and listed in CMH-17 Vol 2.


Recreation / Sporting Goods - G-94M is Toray’s standard 250°F to 300°F cure system. This prepreg can be used for multiple purposes, and is found primarily in recreational and sporting goods applications. It provides excellent mechanical properties, controlled flow, great handling, and a high Tg.


Industrial - Toray’s G83C resin system provides a quick cure (290°F for 20 min) or a low temperature cure (185°F for 6 hours) with the capability to achieve class “A” surface finish. This resin system can be used in a variety of applications such as industrial and aircraft grade products.


Stop by and see Toray’s latest innovations in carbon fibers and engineered products at Booth C22.